Menu
USA

Nissan - Adapter for TDI Engines

TDC 228 Nissan L / KA / Z Adapter kit

alt

This adapter allows the installation of the VW TDI engine to a Nissan transmission. It uses the stock Nissan flywheel and includes a high torque mini starter.

The adapters are not transmission specific, they make the back of the TDI "look" like the back of the engine that the TDI is replacing. The adapters can be used with standard transmissions. 2WD or 4WD.

ALL TDI Adapters are $1,125 USD and include the mini high torque starter

BUY NOW

The adapters are not transmission specific, they make the back of the TDI "look" like the back of the engine that the TDI is replacing.

The adapters can be used with automatic or standard transmissions. 2WD or 4WD.

Accessories to help with your TDI swap

768;550;1c12950cc0c9a5e7bdf7b267cee12069dd73c6d3768;550;9142a366e7ae42bbc5a469229e7a01baada64e1f

TDC 200 Oil Filter Relocation Plate

This billet aluminum housing has provisions for main oil out and return (ORB-6 threads) as well as turbo line in the stock location along with oil pressure sender and a second oil pressure hole for accessory use.

Fits VW TDI model BEW, BHW and ALH engines and possibly other VW engines.

$165.00 USD

BUY NOW

TDC 403 WATER OUTLET

This 1.9L TDI water outlet fitting in the same depth as the tandem pump and just has the rad, heater and temp sender outlets.

Very compact when fighting firewall clearance in a TDI conversion.

$38.00 USD

BUY NOW

768;550;8a548da0ab3621a6db044f64308c43e2edda88ea768;550;2bde9ba390f6e26bc02e2c55d0d761b154e94d4a768;550;3bd546c0d3fd61067f8ea82251089b3572759eec

TDC 207 UNIVERSAL ENGINE MOUNT KIT

This kit includes both left and right engine mount parts.

Just weld them up at the angle you need.

It has the correct spacing to align with holes in the ALH and newer 1.9L and 2L TDI . These are the same parts that we use to build our custom mounts.

$95.00 USD

BUY NOW

768;550;76a5afb028a0f9b61d330c1490022a34db4ea220768;550;3fc4fd56f34760a0fc2d0f8dc4e497759ba1841c

TDC 209 BEW ACCESSORY RELOCATION KIT

Accessory drive relocation plate with idler, belt and hardware.

This kit allows the accessory drive bracket on BEW engines to be moved up 6" for added clearance on the A/C compressor and Power Steering pump.

It puts the top of alternator slightly below the top of the intake manifold.

Some modification of the stock accessory bracket is required.

Only works with BEW code engines, not ALH.

$340.00 USD

BUY NOW

TDC 216 UNIVERSAL FRAME MOUNTS

This kit includes the parts to build the frame side of your custom mounts.

It includes the 1/2" steel plates with 1/4" steel gussets. From the frame side to the outer edge is 4" and they are about 3.5" wide.

Also included are the rubber mounts and hardware.

$120.00 USD

BUY NOW

TDC 217 UNIVERSAL FRAME MOUNTS

This kit includes the parts to build the frame side of your custom mounts.

It includes the 1/4" steel plates with 1/4" steel gussets and the fluid mounts.From the frame side to the outer edge of the fluid mount is 4 3/8", they are about 5" wide and about 3 1/4" tall.

These fluid mounts offer much more vibration control than the rubber mounts in the TDC 216 mount kit but take up much more space.

$120.00 USD

BUY NOW

Any Questions?

Contact Us today!